Have
a clear view to the headlamp on your car, would always be the desire of every
owner. From the previous tips, has provided a way to create the look of the new
headlamp like, especially on the outside. Now, to make it more steady with the
clear outside, you can do some of the following methods. The
first thing you should do is set up the tool and the material beforehand. If
you've successfully removed the headlamp from his home. Prepare A powerful
500-watt hairdryer and above, pliers, detergent, water, wash brushes and a plus
minus screwdriver and supporting equipment as needed.
Preheat
the connection between the shell lamps with mica using haiirdryer. After
tolerable can be plucked out, using a screwdriver to do it slowly so the glass
is not broken. If sealentnya hardened again, heat with a hair dryer again to
make it more soft and easily taken out again. If
the glass has been dislodged, vicious cycle wash on parts such as glass,
reflector and headlamp shell. If the headlamp is made of acrylic glass, do not
need to be brushed, enough on lap course with a cloth / foam. As for the
reflector, just wipe with a damp cloth gently and slowly so as not to leave scratches.
When
finished cleaning, dry all components using a clean cloth and do not notice
until there is remaining fabric fibers. If necessary, do the drying by
evaporation of water remnants using a hairdryer. But do not get too close to
the reflector because it could melt. Finally,
attach the glass again to batoknya again as before. The trick is similar to the
way menegeluarkannya, the heat sealant first. Squeeze all the parts and look
back, how clear your headlights now?
